Creating a VXC to an MVE Integrated with Versa

This topic describes how to connect a Virtual Cross Connect (VXC) to Megaport Virtual Edge (MVE) integrated with Versa Secure SD-WAN.

With MVE configured, you can create VXCs to connect to services on the Megaport network without the need for any physical infrastructure. A VXC is essentially a private point-to-point Ethernet connection between an A-End (your MVE) and a B-End (one of the destination types).

A VXC is mapped with a VLAN ID on each end.

You can order VXCs to reach any destination in the Megaport network. You can connect up to 24 VXCs on a single MVE.

To create a VXC to a cloud service provider

  1. In the Megaport Portal, go to the Services page and select the MVE you want to use.

  2. If this is the first connection for the MVE, click the Cloud tile that matches the VXC type. The tile is a shortcut to the configuration page. Alternatively, click +Connection and select a cloud destination:
    VXC tiles

Connecting MVE to MVE

In the Megaport Portal, you can create a VXC (interconnect connectivity) between MVEs at two or more Megaport locations. The VXC links the SD-WAN branch locations connected to these edge MVEs via the Megaport fabric, without traversing the public internet for the MVE to MVE connectivity. For specific configuration details, see Connecting MVE to MVE.

Deleting a VXC

You can delete a VXC directly from the Megaport Portal.


A transit Virtual Cross Connect (VXC) provides internet connectivity and allows MVE to register and communicate with the Versa SD-WAN overlay network. You cannot modify or delete the transit VXC. Deleting an MVE automatically deletes its associated transit VXC. For details on deleting an MVE, see Deleting an MVE.

To delete a VXC

  1. In the Megaport Portal, go to the Services page.

  2. Click the trash can icon next to the VXC you want to delete.

    Terminate a VXC

  3. Click Yes - Terminate Service to confirm the VXC termination, or click No, Keep Services to cancel.

Last update: